2RV/2RW/2RX/2RY/3RA-3
7-32
(4) Jam Codes
Error code
Contents
note
J0000
Power ON jam
J0101/J0104/J0105/
J0106
Paper jam caused by the
software factor
J0107
Fuser temperature stabiliza-
tion time-out
J0110
Right cover open detection
J0501/J0502/J0503/
J0508/J0509
No feed
Note: Prior check point at no feed
J0501/J0502/J0503
Cassette no feed
Condition: No mark of paper feed at the paper
leading edge and the cassette bottom plate does
not rise.
J0501
Cassette no feed
Condition: No mark of paper feed at the paper
leading edge and, the cassette bottom plate is ris-
ing but the paper feed drive does not start.
J0502/J0503
Cassette no feed
Condition: No mark of paper feed at the paper
leading edge and, the cassette bottom plate is ris-
ing but the paper feed drive does not start.
J0501/J0502/J0503
Cassette no feed
Condition: Mark of paper feed slippage at the
paper leading edge (the pickup roller cannot con-
vey paper.)
J0501/J0502/J0503
Cassette no feed
Condition: A part other than the center part of the
leading edge of the paper is broken. (Paper jam
occurs as paper is caught up before entering the
retard roller)
J0501/J0502/J0503
Cassette no feed
Condition: The center part of the paper leading
edge is folded or torn (It does not reach to the
retard roller or retard roller does not rotate).
J0501
Cassette no feed
Condition: The paper conveying force is lowered
and paper slips.
J0502/J0503
Cassette no feed
Condition: The paper conveying force is lowered
and paper slips.
J0501
Cassette no feed
Condition: The paper conveying force is lowered
and paper slips or the roller does not rotate.
J0502/J0503
Cassette no feed
Condition: The paper conveying force is lowered
and paper slips or the roller does not rotate.
J0501
Cassette no feed
Condition: The sensor detection is unstable.
J0502/J0503
Cassette no feed
Condition: The sensor detection is unstable.
J0508
No paper feed from the
duplex section
Condition: Paper is damaged (Paper is caught
up, the paper conveying force is lowered or paper
slips).
J0508
No paper feed from the
duplex section
Condition: Paper is not damaged (The duplex
conveying drive does not rotate).
Содержание PF-1100
Страница 4: ...This page is intentionally left blank...
Страница 10: ...This page is intentionally left blank...
Страница 337: ...2RV 2RW 2RX 2RY 3RA 8 13 5 Operation panel PWB LED Connector position Figure 8 9 PWB photograph Figure 8 10 YC1 1 17...
Страница 355: ...Installation Guide PF 1100 250 sheets 1 Paper Feeder Installation Guide...