Kyocera PF-1100, Руководство по обслуживанию

Страница: 192 / 358

2RV/2RW/2RX/2RY/3RA
6-8
(50)
Auto cassette change 0: OFF
1: ON (Default)
(51)
Color printing double count mode 0: All single counts
3: Folio (Less than 330 mm length), Single counts
(52)
Black and white printing double count
mode 0: All single counts
3: Folio (Less than 330 mm length), Single counts
(53)
Billing counts timing 0: When secondary paper feed starts
1: When the paper is ejected
(54)
Temperature (machine inside) -
(55)
Temperature (machine outside) -
(56)
Relative humidity (machine outside) -
(57)
Absolute humidity (machine outside) -
(58)
LSU temperature information -
(59)
LSU2 temperature information -
(60)
DRT information -
(61)
Asset Number -
(62)
Job end judgment time-out time -
(63)
Job end detection mode 0: Detects as one job, even if contained multiple jobs
1: Detects as individual job, dividing multiple jobs at a
break in job
(64)
Prescribe environment reset 0: Off
1: On
(65)
Media type attributes
1 to 28 (Not used: 18, 19, 20)
*: For details on settings, refer to
MDAT command in "Prescribe
Commands Reference Manual".
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1
5: Heavy 2 Duplex settings
6: Heavy 3 0: Disable
7: Extra Heavy 1: Enable
(66)
IO Calibration information K/C/M/Y
(67)
Bias Calibration information -
(68)
Calibration information -
(69)
Sensor initial information -
(70)
Calibration information -
(71)
Calibration information -
(72)
Calibration information -
(73)
Calibration information -
(74)
Paper loop correction shift amount -
(75)
Paper loop correction interval -
(76)
Paper loop correction patch amount -
(77)
Calibration information -
No. Items Contents