Kyocera KI-G100 GSM Handset -
Ver.
0.3
Preliminary Version -
01.1999
CALL WAITING, CALL HOLD AND MULTIPARTY CALLS
The GSM services “Call Waiting” and “Call Hold” allow you to put an active call
on hold to be able to answer a waiting call or initiate a new call. The “Call
Waiting” function can be activated in menu “43 Waiting”. If this function is
disabled, you will not be notified of a waiting call. A second caller will either hear
the busy tone or their call will be diverted according to the set diversion. If the
function is enabled, the caller will hear the ringing tone and you will be also
notified.
The “Multiparty” (Mtpy) service allows you to speak to up to 5 other parties on
the same call.
Active call(s) and waiting call
One or more calls are active and a new one is waiting (indicated by a signal tone
through the earpiece and red light on top of the phone blinking):
•
Press
to end all active and held calls and
then
to accept the new call,
or
•
Press (Menu) to access the Call Waiting
Menu
•
Select with
(
5
6
):
Answer
Replace
Reject
I am busy
Quit
to answer the waiting call, thus putting on hold the active ones
to hang up all active calls and accept the new one
to reject the waiting call. Their call will be dropped.
to let the waiting caller hear the busy tone or let their call
being diverted if the diversion
When Busy
has been set
to leave the Call Waiting Menu
Call
2/2
Waiting
+491795905001
1m32
Menu Mem
•
Press (
OK
) to confirm
To put an active call on hold to make a second call
•
Press (
Menu
) to access the In-Call Menu
•
Select with
(
5
6
) the option “Hold”
•
Press (
OK
) to confirm
•
Dial a number and make the second call
Call
Active
02159918396
1m54
Menu
Mem
Extra Dialling Services
10
