Kyocera KI-G100 GSM Handset -
Ver.
0.3
Preliminary Version -
01.1999
21 Text
1 Read new
read
all unread message(s) that have been received:
•
Scroll in the message with
(
5
6
)
•
Press (
Menu
) to access the Message Menu and select
1 Read Next
(appears only if there is at least one other to read)
2 Edit
to edit the message (see next section)
3 Reply
to reply to the message’s sender (see next section)
5 Extract
to extract the number included in the message
6 Erase
to erase the message
7 Info
to display additional information about this message
2 Read all
read all messages: same procedure as above
3
Create
write a new message:
•
Enter a message (max. 160 characters)
-
To enter a letter, press a key several times until the desired
letter appears (see keypad allocation page 29)
-
Use
(A/a) to toggle between upper- and lowercase
-
If you make a mistake, use the
(Clear) key:
- short press: clear the last character
- long press: clear the complete entry
•
Press (
OK
) and enter a destination number
•
to access the Create Message Menu and select:
1 Save
to save the message first
2 Send
to send the message first
4 Settings
changing of message control settings:
1 Msg Centre
tel no. of the network unit which routes the messages
2 Reply Path
let the answer to your message be prepaid
3 Valid per
set the validity duration for not transmitted message
22 Broadcast
1 Read new
read
unread message(s) sent by the network
•
Scroll in the message with
(
▲
▼
)
•
Press (
Menu
) to access the Message Menu and follow the same
procedure as in previous section
2 Read all
read all messages: same procedure as above
3
Configuration
select the type and language of the messages to be
Menus
17
