6-8
6
G
Using the SET U
P
Mode Functions
Use this procedure to adjust the volume of the operation beep emitted when a camera
button is pressed or activation beep emitted when the camera is switched on.
3
Press
U
or
D
on the 4-way button to select
[OFF] or [ON] and then press the OK button
E
.
OFF:
Settings revert to their default values when the
camera is switched off.
ON:
Settings remain valid when the camera is switched
off.
4
The selected settings are applied and the screen in step 2
reappears.
[BEEP]
Adjusting the Volume of the Camera Button Beep
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[BEEP] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
the desired button beep volume and then
press the OK button
E
.
+3:
Maximum volume
+2:
Medium volume (default)
+1:
Low volume
OFF:
No button beep
4
The selected settings are applied and the screen in step 2
reappears.
Finecam_E.book Page 8 Thursday, August 28, 2003 6:21 PM
