Kyocera Ecosys M812cidn, Руководство по эксплуатации

Страница: 123 / 526

2-45
Installing and Setting up the Machine > Command Center RX
2
In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Wired Network]
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case
letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
4
From the [Device Settings] menu, click [System].
2
Specify the host name.
Enter the device information, and then click [Submit].
Setting SMTP and E-mail
By configuring the SMTP settings, it is possible to send the images scanned by the machine as E-mail attachments and
to send E-mail notices when jobs have been completed.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, configure the following.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click [Reset] in the [Management Settings] menu, and then click
[Restart Network] in "Restart".
3
1
2