Kyocera Ecosys FS-6970DN, Руководство по обслуживанию

Страница: 36 / 126

2J5
1-3-12
Service items Description
No. Items Description
��� Paper
Jam
Log # Count. Event
Remembers 1 to 16 of occurrence. If
the occurrence of the previous paper
jam is less than 16, all of the paper
jams are logged. When the occur-
rence excessed 16, the oldest occur-
rence is removed. The total page
count at the time of
the paper jam. Log code (2 digit, hexadecimal, 6
categories)
(a) Cause of a paper jam
(b) Paper source
(c) Paper size
(d) Paper type
(e) Paper exit
(a) Cause of paper jam
10: Paper does not arrive at the registration sensor. [42] (MP tray)
10: Paper does not arrive at the registration sensor. [31] (Printer’s cassette)
10: Paper does not arrive at the registration sensor. [31] (Paper feeder 1)
10: Paper does not arrive at the registration sensor. [31] (Paper feeder 2)
10: Paper does not arrive at the registration sensor. [31] (Paper feeder 3)
10: Paper does not arrive at the registration sensor. [31] (Paper feeder 4)
10: Paper does not arrive at the registration sensor. [49] (Duplex conveying)
11: Paper does not pass the registration sensor. [48]
12: Paper remains at the registration sensor when power is turned on. [48]
20: Paper does not arrive at the paper exit sensor. [48]
21: Paper does not pass the paper exit sensor. [47]
22: Paper remains at the paper exit sensor when power is turned on. [47]
30: Paper does not arrive at the paper feeder 1’s PF paper feed sensor. [32] (Paper feeder 1)
30: Paper does not arrive at the paper feeder 1’s PF paper feed sensor. [33] (Paper feeder 2)
30: Paper does not arrive at the paper feeder 1’s PF paper feed sensor. [33] (Paper feeder 3)
30: Paper does not arrive at the paper feeder 1’s PF paper feed sensor. [33] (Paper feeder 4)
31: Paper does not pass the paper feeder 1’s PF paper sensor. [32]
32: Paper remains at the paper feeder 1’s PF paper feed sensor when power is turned on. [32]
40: Paper does not arrive at the paper feeder 2’s PF paper feed sensor. [33] (Paper feeder 2)
40: Paper does not arrive at the paper feeder 2’s PF paper feed sensor. [34] (Paper feeder 3)
40: Paper does not arrive at the paper feeder 2’s PF paper feed sensor. [34] (Paper feeder 4)
41: Paper does not pass the paper feeder 2’s PF paper sensor. [33]
42: Paper remains at the paper feeder 2’s PF paper feed sensor when power is turned on. [33]
50: Paper does not arrive at the paper feeder 3’s paper feed sensor. [34] (Paper feeder 3)
50: Paper does not arrive at the paper feeder 3’s paper feed sensor. [35] (Paper feeder 4)
51: Paper does not pass the paper feeder 3’s paper sensor. [34] (Paper feeder 3)
52: Paper remains at the paper feeder 3’s paper feed sensor when power is turned on. [34]
60: Paper does not arrive at the paper feeder 4’s paper feed sensor. [35] (Paper feeder 4)
A1: Paper does not arrive at the duplex sensor. [47] (Rear unit)
A2: Paper does not pass the duplex sensor. [47] (Rear unit)
A3: Paper does not arrive at the duplex jam sensor. [49] (Duplex conveying)
A4: Paper does not pass the duplex jam sensor. [49] (Duplex conveying)
A5: Paper remains at the duplex jam sensor when power is turned on. [49]
E0: Paper misfeed occurs due to forced stop when an error occurs during printing. (such as open-
ing of a cover) [00]
E1: The length of paper is shorter than designated for the paper cassette. [47]
E2: A5 lengthwise paper has been fed despite the paper cassette is set to A4 width wise (see
reference 1 below). [00]
E3: Paper cassette 1 was opened in the middle of duplex printing (see reference 2 below). [49]
F0: Paper does not arrive at the face down tray paper full sensor. [47]
F1 to FE: Paper misfeed by another cause. [00]
Note:
Values (hexadecimal) within [ ] indicate paper misfeed locations.