Kyocera Ecosys FS-6700, Руководство по обслуживанию

Страница: 32 / 167

Troubleshooting
User-recoverable errors
6-13
FS-6700
Memory card errors
Format error MEMORY CARD This message appears when the printer is in the
ready state and the memory card is not formatted,
and therefore cannot be read or written. Follow the
procedure on Section ... to format the card.
Warning battery MEMORY CARD This message appears when the printer is in the
ready state and the battery in the memory card is
low. You can still enter the memory card mode, but
the battery should be changed as soon as possible.
MEMORY CARD err/ ##..Press
CONTINUECONT
This message appears when an error occurs during
access to the memory card using the PRESCRIBE II
ICCD command or from the printer’s control panel
(codes 09 and 11 only). The error is indicated by one
of the numbers ## listed under the Memory card
errors which follows.
>Read fonts Failed The amount of memory available for the fonts
header parts of font is too small to load more fonts.
Try deleting unnecessary fonts and macros.
I/F occupied This message is displayed when you attempt to use
the printer’s control panel to change the environ-
mental settings on the interface from which data are
presently being received.
Processing PAR FIT A4 FIT (image FITting) flashes to indicate that a loss of
raster data occurred when the data was compressed
to be fitted within the currently available memory.
Flashing FIT extinguishes automatically when the
job times out; the printer receives the next data from
the host computer; or if you press any key on the
printer’s control panel. Try adding more memory in
the printer to prevent this error.
Processing PAR 600 A4ÍProcessing
PAR 300 A4
Change of the resolution indicator from 600 to 300
(flashing) means that the job in 600-dpi resolution
was not able to run within the currently available
memory. The resolution reverts to 600 dpi automati-
cally when the job times out; the printer receives the
next data from the host computer; or if you press
any key on the printer’s control panel. Try adding
more memory in the printer to prevent this error.
>Read fonts Failed The amount of memory available for the fonts
header parts of font is too small to load more fonts.
Try deleting unnecessary fonts and macros.
Table 6. 6 Memory card errors
Error
code
Applicable
card type
Meaning
01 SRAM Card size error (An attempt was made to write data of greater
than 16 MB in size.). Reduce the size of the data to be written
from the host computer to 16 MB or less; or, a file name could
not be found in the memory card.
02 SRAM No memory card inserted. Insert a proper memory card.
Table 6. 5 User-recoverable errors
Indication Corrective action