Sprint Direct Connect
47
End a Direct Connect Call
There are three ways to disconnect a Direct Connect call.
n
Do nothing; the call will automatically end after several seconds if neither party presses the DC
button.
– or –
Press
.
– or –
Press the call list button.
Convert a Direct Connect Call to a Phone Call
1. While on a Direct Connect call, press
OPTIONS
(right softkey) >
Convert Call
.
2. Read the message, and then select a number (if more than one number is available) or select
CONVERT CALL
(left softkey).
l
Your phone ends the Direct Connect call and dials the selected number.
Tip
:
Quieting incoming calls and increasing your privacy.
When you are in an area where
incoming Direct Connect calls may disturb others, or if you wish to increase the privacy of your calls,
please set your speakerphone to “off” and your ringer to “vibrate.” When the speakerphone is off,
Direct Connect calls use the phone’s earpiece and microphone, while still utilizing the DC button.
You may also use an earbud or other hands-free device for increased convenience.
Direct Connect Permissions
You can control which numbers can reach your phone using Direct Connect.
Set Direct Connect Permissions
1. Press
>
Settings
>
DC Settings
>
Permissions
.
2. Select
Accept all DC calls, except those from numbers I block
or
Reject all DC calls,
except those from numbers I allow
.
3. If you selected
Accept all DC calls, except those from numbers I block
, select
Block
Another #
>
New Number, Contacts
, or
Recent DC’s
.
– or –
If you selected
Reject all DC calls, except those from numbers I allow
, select
Allow
Another #
>
New Number
or
Contacts
.
4. Follow the instructions to add or edit the
BLOCKED DC #S
or the
ALLOWED DC #S
list.
