Kyocera DURASLATE KC-T304C, Руководство пользователя

Страница: 39 / 44

A
ppendix
38
■ AC Adapter
Input 100V - 240V AC 0.3A 50/60 Hz
Output 5.4V DC 1.5A
Charging
temperature
range 5 ℃ to 35 ℃
Dimensions
(W × H × D) AC adapter main unit: Approx. 73.5 × 30.5 × 42.3
mm
Cable length: Approx. 1.2 m (except for connector
insertion plug)
Weight Approx. 90g
◎
The continuous standby time may drop to less than half
depending on the battery charging status, usage environment
such as temperature, reception condition at the location
where the product is used, and the function settings.
General Notes
This model
【
KC-T304C
】
is confirmed to comply with guidelines
relating to effects of radio wave exposure as set forth by the Federal
Communications Commission (FCC). Refer to the following.
FCC RF Exposure Information
Your wireless tablet personal computer is a radio transmitter and
receiver. It is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organization through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in
positions and locations (e.g. worn on the body) as required by the
FCC for each model.
The highest SAR value for this model wireless tablet personal
computer as reported to the FCC when tested for use worn on the
body in a holder or carry case, is 1.191 W/kg.
Body-worn Operation; This device was tested for typical body-worn
operations with the wireless tablet personal computer kept 0 cm
from the body. The use of beltclips, holsters and similar accessories
should not contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be