Saf
et
y P
recautions
28
●
For charging the product, do not exceed the rating of an outlet
or wiring device by starburst connection, etc.
■
Main Unit
●
The battery is built into the product and it is not user replaceable.
For information on battery replacement, contact the support
center on the back cover.
●
Do not forcefully press, tap or intentionally subject the display to
strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press your fingernails, sharp objects, or hard
objects against buttons or display surface. Doing so may cause
scratching or damage.
●
Never use the modified product. Use of a modified device
violates the Radio Law and Telecommunications Business Law.
The product has acquired such certification as conformity with
technical regulations for a specified radio station based on
the Radio Law and conformity with technical regulations for a
terminal device based on the Telecommunications Business Law,
and the "Technical Conformity Mark " can be confirmed on the
product.
If the modification is made to the internal components,
the certifications of conformity with technical regulations
will become invalid. Never use the product without these
certifications valid. Doing so violates the Radio Law and
Telecommunications Business Law.
●
Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product as it might cause
malfunction.
Putting strong magnetism close to the product might cause false
operation.
●
Do not bring magnetized cards such as cash cards, credit cards
and prepaid cards closer to the product. Doing so may result in
loss of recorded information.
●
When you put the product in your bag, etc., take care so that the
display does not come in contact with metal objects or other
hard objects. Doing so may cause scratching or damage.
●
When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water droplets (i.e. condensation) sometimes
are formed inside the product. Note that when used under
conditions such as this, humidity might cause corrosion or a
fault.
●
Camera lens or inside of the display may mist over (dew
formation) because of usage environment such as temperature
or humidity. This is not malfunctioning or abnormal.
●
Environment for easily generating dew formation on the camera
lens or inside of the display
In the following cases, such as large temperature change or high
humidity, camera lens or inside of the display mist over because
of usage environment.
・
Bring the product from a high-temperature land into cold
water instantly.
・
Bring the product from a cold place into a warm place such as
an indoor.
●
How to reduce condensation
Do not use the product in places that get hot and humid, and
sandy or dusty places. Leave the product for a while until the
condensation is cleared when the ambient temperature is held
constant.
Содержание DURASLATE KC-T304C
Страница 1: ...KC T304C...
