Kyocera DURASLATE KC-T304C, Руководство пользователя

Страница: 30 / 44

29
Saf
et
y P
recautions
●
While writing/reading data to/from a microSD memory card, do
not subject the product to vibration or impact, or turn off the
power. Doing so may cause data loss or malfunction.
●
Do not cover the sensor with your finger or put a sticker on it.
May hinder the sensor from detecting the ambient light level
and functioning correctly.
●
Do not allow liquids, metal objects, or other foreign objects to
get inside of the microSD memory card slot. Doing so may cause
malfunction.
●
Do not give strong impact on the product such as dropping,
throwing, stomping. Doing so may cause malfunction.
●
Do not place the product directly on sand at a beach, etc. If sand
or other small particles get inside the microphone, speaker, or
the product, it may cause the volume to drop or malfunction.
●
Do not use the product near a microwave oven or IH cooker.
Doing so might cause a failure or malfunction.
● If you leave the same image displayed on the screen for a long
time, note that there may be black stains, unevenness, or image
persistence on the screen.
● The LCD backlight used for the product has a service life.
Depending on your usage condition, the screen may be dark due
to reduced brightness or the LCD backlight may not light.
■
Touch Panel
●
The touch panel is designed to be lightly touched by fingers.
Avoid pressing forcefully or using sharp objects (fingernail,
ballpoint pen, pin, etc.).
●
Any soiling on the display surface may cause false operation.
Wipe the display with a soft, dry cloth.
●
Putting stickers or sheets (e.g. commercially available protective
films, peep prevention sheets) on the display might cause
incorrect operation of the touch panel.
●
When carrying the product in your bag, etc., take care not to put
the touch panel close to metals or other conductive materials, as it
might cause false operation of the touch panel.
●
If any operation is done without touching the screen, or if the
product does not work by touching the screen, press the power
button to turn off the display, and then press the power button
again to make an operation.
●
Do not touch the screen while any logos are displayed after
pressing the power button, or when you press the power button
to turn on the display in the sleep mode, as initial settings are in
progress. Doing so may cause malfunction of the touch panel.
■ Internal Battery
(The internal battery of the product is a
lithium-ion battery.)
The internal battery is not fully charged at the
time of purchase. Charge the battery before
using the product. Also charge the battery
after long periods of disuse before using the
product.