46
Using the Camera
13 U
SING
THE
C
AMERA
Tips before operating your
camera
• You cannot activate the camera while
on a call.
• Once the camera is active, the main screen
acts as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Setting up the camera” on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous screen.
Accessing picture mode
1.
Flip open
2.
Press and hold
until you hear two beeps
to activate picture mode.
Camera settings
1.
Press and hold
to activate picture mode.
2.
Press
to
select
Options
.
3.
Press
to select
Settings
.
4.
Highlight an option and press
:
–
Flash
options are Off, On, or Automatic.
–
Resolution
options are 640 x 480,
320 x 240 (best for sending to email),
160 x 120 and 1280 x 1024.
–
Low Light Mode
brightens the picture for
low light environments.
–
Self Timer
options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
mode is activated.
–
Multishot
allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone plays each time a
picture is taken. A second tone plays when
the final picture is taken.
–
Shutter Sound
sets the sound used when
the camera takes a picture.
–
White Balance
allows the camera to adjust
for different lighting. Options are
Automatic, Incandescent, Fluorescent,
Daylight, and Darkness.
–
Color Tone
allows you to capture pictures
with different coloring. Options are
Normal, Black & White, Negative,
and Sepia.
82-G1631-1EN.book Page 46 Tuesday, August 15, 2006 11:36 AM