User Guide for the Cyclops Phone
15
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. Standard airtime
charges apply.
If you see “New Messages”
1.
Press
to
select
Call
, which initiates a call to your
voicemail number.
2.
Follow the prompts to retrieve the message.
To clear the screen without checking messages:
• Press
to
select
Ignore
.
If you see only the
symbol
1.
Press and hold
to initiate a call to your
voicemail number.
2.
Follow the prompts to retrieve the message.
• You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting sound alerts” on
page 38.
Emergency services
Note:
Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
• Dial your 3-digit emergency code and
press .
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters
Emergency mode
. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
Exiting Emergency mode
When you have completed the emergency call:
1.
Press
to
select
Exit
.
2.
Press
again to confirm your choice.
Note:
To determine who has access to your
location, see “Setting position location” on
page 42.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
• Select
Menu
→
Recent calls
→
All calls timer
.
This timer cannot be reset.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu
→
Settings
→
Sounds
→
Minute alert
→
Enabled
.
82-G1631-1EN.book Page 15 Tuesday, August 15, 2006 11:36 AM
