manualshive.com logo in svg

Kyocera AD-63, Руководство по обслуживанию

Поделиться
Скачать
Kyocera AD-63 Скачать руководство пользователя страница 158

2FD/2FF/2FG

1-4-67

Maintenance

Description

item No.

U904

Checking/clearing the service call counts

Description

Displays or clears the service call code counts by types.

Purpose

To check the service call code status by types. Also to clear the service call code counts after replacing
consumable parts.

Method

1. Press the start key. The service call count is displayed by service call codes.
2. Change the screen using the 

∗

 or # keys.

Clearing

1. Select the count to be cleared. The selected item is displayed in reverse. To clear all counts, press the reset

key.

2. Press the start key. The count is cleared. When all counts are cleared, the screen for selecting a

maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.

U905

Checking/clearing counts by optional devices

Description

Displays or clears the counts of the optional DP or finisher.

Purpose

To check the use of the DP and finisher. Also to clear the counts after replacing consumable parts.

Method

1. Press the start key. The screen for selecting an item is displayed.
2. Select the device, the count of which is to be checked and press the start key. The count of the selected

device is displayed.
• DP

Display

Description

ADP

No. of single-sided originals that has passed through the DP in ADP mode

RADP

No. of double-sided originals that has passed through the DP in RADP mode

• Finisher (SORTER)

Display

Description

CP CNT

No. of copies that has passed

STAPLE

Frequency the stapler has been activated

PUNCH

Frequency the punch has been activated

SADDLE

Frequency the booklet has been activated

Clearing

1. Select the item to be cleared. The selected item is displayed in reverse.
2. Press the start key. The count is cleared.
3. To return to the screen for selecting an item, press the stop/clear key.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.

Содержание AD-63


































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды