manualshive.com logo in svg

Kyocera AD-63, Руководство по обслуживанию

Поделиться
Скачать
Kyocera AD-63 Скачать руководство пользователя страница 115

Maintenance

Description

item No.

2FD/2FF/2FG

1-4-24

U063

Adjusting the shading position

Description

Changes the shading position.

Purpose

Used when white lines continue to appear longitudinally on the image after the shading plate is cleaned. This is
due to flaws or stains inside the shading plate. To prevent this problem, the shading position should be changed
so that shading is possible without being affected by the flaws or stains.

Method

1. Press the start key. The screen for adjustment is displayed.
2. Change the setting using the cursor up/down keys.

Description

Setting range

Initial setting

Change in value per step

Shading position

–8 to +2

0

0.17 mm

Increasing the setting moves the shading position toward the machine right, and decreasing it moves the
position toward the machine left.

3. Press the start key. The value is set.

Interrupt copy mode

While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.

Completion

Press the stop/clear key at the screen for adjustment. The screen for selecting a maintenance item No. is
displayed.

U065

Adjusting the scanner magnification

Adjustment

See pages 1-6-27 and 28.

U066

Adjusting the leading edge registration for scanning an original on the contact glass

Adjustment

See page 1-6-29.

U067

Adjusting the center line for scanning an original on the contact glass

Adjustment

See page 1-6-30.

U068

Adjusting the scanning position for originals from the DP

Description

Adjusts the position for scanning originals from the DP.

Purpose

Used when there is a regular error between the leading edges of the original and the copy image when the DP
is used.

Method

Press the start key. The screen for executing is displayed.

Setting

1. Change the setting using the cursor up/down keys.

Description

Setting range

Initial setting

Change in value per step

Scanning position

–32 to +32

0

0.17 mm

Increasing the setting moves the image backward, and decreasing it moves the image forward.

2. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Содержание AD-63


































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды