Kyocera 6030, Руководство по эксплуатации

Страница: 42 / 124

Preparing to Copy
2-6
2 Adjust the paper width guides to fit the width of the
paper.
3 Insert the paper along the paper width guides into the
tray until it stops.
Ensure that the paper width guides are flush against
the edges of the paper.
IMPORTANT: Before loading postcards and other
types of thick paper that may be curled, straighten out
the paper. The paper may not be fed depending on the
paper quality.
Only load the MP tray when you are using it. Avoid
leaving paper in the MP tray.
Ensure that the loaded paper does not exceed the
level indicated. Exceeding the maximum level may
cause a paper jam.
When loading envelopes, open the flap and keep the
printing side face-up. Insert envelopes against the guide with the flap on the right until they stop.
Loading Paper in the Optional Side Feeder
The optional side feeder has a capacity of 4,000 sheets of 11 × 8
1/2
" (A4 or B5) standard paper
(80 g/m²).
IMPORTANT: After loading paper, be sure to specify the type and size of the paper loaded in the
side feeder on the operation panel. Refer to Specifying the Paper Type on page 2-9 for details.
1 Press the switch for the paper lifter on the right side of
the side feeder. The paper lifter inside of the side
feeder will drop to the bottom.
NOTE: When the side feeder runs out of paper, the
paper lifter will automatically descend to the bottom.