Kyocera 4850w, Руководство по эксплуатации

Страница: 66 / 108

CHAPTER 7 MANAGEMENT AND SETTING
7-6
%
Sync. Cut length Whether paper cut length is displayed or not when synchronized cut is
selected can be selected. ON/OFF OFF
^
Delete memory If this item is set to “Confirm before deleting” [“Check data of repeat
copy”], when the Reset Copy key is pressed in the repeat copy mode,
a confirmation screen for deletion of image data will appear. Delete/ Confirm before
deleting Delete
&
Per rep copy
[Permit repeat]
If this item is set to “Deny” [“Unpermit”], the repeat copy function
cannot be used. If this item is set to “Code number” [“ID-code”], the
repeat copy code must be entered for repeat copy. Permit/ Code number/
Deny Permit
*
Chg rep. copy#
[Repeat
codechange]
The repeat copy code that must be entered if “
&
Per rep copy [Permit
repeat]” is set to “Code number” [“ID-code”] can be changed.
0000 to 9999 4850
(
Memory compress
The compression ratio of image data stored in memory can be set. If
compression ratio is set to a higher level, the allowable number of
originals that can be scanned will be larger but halftone (gray) image
may be deteriorated. If “Low-compression “ (high image quality) is
selected, addition of memory may be needed.
* If this setting is changed when data remains in the image memory,
the data will be cleared.
Low-compression/
Standard-compression/
High-compression Standard-
compres-
sion
)
Maximum Jobs The maximum number of jobs that can be reserved is set. Based on
the number of jobs, the number of originals that can be scanned in the
sort or group mode for job reserve is limited.
The maximum number is 20 sheets for “5 jobs”, 10 sheets for “10
jobs”, and 5 sheets for “20 jobs”. 5 jobs/ 10 jobs/ 20 jobs 5 jobs
Setting item Details Selectable values Default Page
7-20
7-21
7-21
7-21
7-21
7-22