Kyocera 1102JD3NL0, Руководство по продвинутой эксплуатации

Страница: 121 / 374

Printer Settings
3-27
Handling Memory Devices
You can use three types of memory devices with this device: memory card, optional hard disk, or
RAM disk. Use memory card and hard disk by installing into the printer's provided slots. Use RAM
disk by assigning a portion of the printers memory to RAM disk mode. The basic usage of each type
of memory is the same. Here, memory device usage is explained using a memory card.
Memory Card Operation
This device has a memory card slot. Save fonts to a memory card to print using other than the
internal fonts or to save or read print data.
Use a memory card with this device to enable the following operations.
• Memory Card Format (Initialization)
• Write Data
• Read Data (data, fonts, programs, or macros)
• Delete Data
• Print List of Partitions
Inserting the Memory Card
NOTE: Always switch off (
{
posion) the main power switch when removing or inserting a memory
card.
1 Remove the memory card cover from the interface
cover and attach the memory card cover to the
memory card.
2 Hold the memory card cover and insert the memory
card with the label face upward into the memory card
slot until the memory card stops.
NOTE: Use the memory card with the memory card
cover attached.
Replace the memory card cover after the memory
card is used.
Memory Card Format (Initialization)
Before using a new memory card, the card must first be formatted. Formatting prepares the card for
data to be written to it.
NOTE: Format the memory card at the device.
1 Press the Printer key.