Kyocera Mita KM-8530, Руководство по эксплуатации

Страница: 379 / 408

13-37
[11] Tray Auto Select Setting
Select to be detected or not to be detected, and priority of detection for each tray
when ATS/APS functions.
Key Operator Mode Screen 1 Key Operator Mode Screen 2
Tray Auto Select Setting Screen
Procedure
1 Touch [11] Tray auto select setting on the Key Operator Mode Screen to display the
Tray Auto Select Setting Screen.
2 On the left half of the screen, touch to highlight each tray key, then select OFF or ON
to specify whether the selected tray is to be automatically detected or not when ATS/
APS functions.
3 Tray keys specified as ATS/APS ON will appear on the right half of the screen.
Touch to highlight the desired tray key, then change its priority by using Up (
c
) and
Down (
d
) arrow keys.
4 Touch OK to complete the setting and restore the Key Operator Mode Screen.
5 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
Centering
Adjustment
Timing
Adjustment
HDD
Management
Finisher
Adjustment
Side 2 Lens
Adjustment
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.C.M.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode