Kyocera Mita KM-8530, Руководство по эксплуатации

Страница: 117 / 408

Checking Feature Selections and Proof Copying (continued)
3-55
5.
To release the settings:
Touch the desired copying condition key on the Check Screen to highlight it, then
touch
RELEASE SETTING .
The confirmation screen will appear on the Check Screen.
Touch
YES to cancel the function, or NO to restore.
• If making a sample copy, proceed to the next step.
• To start printing, proceed to step
8 .
6.
Press [ PROOF COPY ] on the control panel or touch PROOF COPY
on the Check Screen.
A sample copy will be output.
DETAILS
• Press [ STOP ] to suspend the proof copying. In this case, the scanned
image data will not be deleted from memory.
• You cannot change or release selections that appeared dimmed after
proof copying.
• When the copy result is satisfactory, proceed to the next step.
• When any setting change is required, return to step
4 , then repeat proof copying,
as required.
If the desired selection cannot be changed, press [
STOP ] to delete all the data in
memory, then press [ AUTO RESET ] to restart the job setting.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
DF-630/635
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode