Kyocera Mita KM-2030, Инструкция по эксплуатации

Страница: 53 / 74

CHAPTER 6 COPIER MANAGEMENT
5
PAPER TYPE (1ST to 4TH)
Press the cursor down or up key to select the paper type.
Press the enter key.
NOTE
• The setting procedure for the paper type is the same for Drawers 1,
2, 3 and 4.
6
PAPER TYPE (BYPASS)
Press the cursor down or up key to select the paper type.
Press the enter key.
7
SELECT EJECTOR OF FAX
The optional fax board and job separator must be installed to perform
this setting. If not, this setting will not be displayed.
3
SPECIAL PAPER
Press the cursor down or up key to select the paper feed
drawer to be marked with (
*
).
Press the cursor right or left key. The mark (
*
) will appear
aside the paper feed drawer. Press the cursor right or left key
again to cancel it.
NOTE
• More than two marks can be put.
Press the cursor up key to select “END” and press the enter
key.
4
APS
Press the cursor down or up key to select “ON” or “OFF”.
Press the enter key.
1
2
1
2
3
1
2
1
2
6-17