Kyocera Mita KM-2030, Инструкция по эксплуатации

Страница: 23 / 74

CHAPTER 4 BASIC OPERATION
Press the Paper Select key to specify the paper size.
The magnification ratio will be displayed.
Copying will start when the Start key is pressed.
(2) Zoom copy mode
The zoom ratio can be set to any value from 50 to 200% in 1%
increments.
Set the original(s).
Press the Zoom (+) or Zoom (–) key to change the displayed
zoom ratio.
Press the Paper Select key to change the paper size.
Copying will start when the Start key is pressed.
(1) Auto magnification selection mode
The original image is enlarged/reduced automatically according to the
selected paper size.
IMPORTANT
• When using this mode regularly, make sure that “AMS” has been
selected in “
8
AMS MODE” on page 6-12.
Set the original(s).
The size of the original will be automatically detected and the
same size paper as the original will be selected.
NOTE
• If “100%” has been selected in “
8
AMS MODE” on page 6-12,
press the Manual key to display “AMS”.
2. Enlargement/reduction
4-4
1
1
2
3
2
3