© 2020 Kymeta Corporation. All rights reserved.
28
08 December 2020
700-00121-000 revD Kymeta u8 products installation and user guide
15
Package the Kymeta u8 terminal
✎
Kymeta recommends boxing the u8 terminal in the original packaging. If you need to return a terminal, Kymeta
provides the replacement terminal first. Use the packaging from the replacement terminal to ship the original one
back.
The order of the following steps may vary depending upon your mounting structure. Always follow the guidelines in
700-00122-000 Kymeta™ u8 products safety and handling guide
for best practices.
1.
Power off the terminal using the power switch on the power interface box.
2.
Carefully disconnect and cap the power cable and Ethernet cable, being mindful of pins and connectors.
a.
Ensure cable ends do not drop into water or dirt.
b.
Dry off cables and coil them into the box, binding with cable ties.
c.
Do not leave adapters on cables.
3.
Remove the u8 from the mounting structure and place face-down on a non-abrasive surface for safe and easy
access.
4.
Dry off all equipment and remove any debris.
5.
Place the u8 back into the shipping compartment in the original cardboard box.
a.
Secure any loose items (e.g., screws, tools, cable ends).
b.
Close the box.
6.
Place the u8 original shipping box inside a reusable container.
7.
Close the container and fasten the latches carefully.
