© 2020 Kymeta Corporation. All rights reserved.
24
08 December 2020
700-00121-000 revD Kymeta u8 products installation and user guide
If you utilize the antenna reset button, and depress the button for 5 seconds or longer, the u8 reverts to baseline
network configuration:
Network Interface
Network Setting
Baseline configuration (after reset)
Local network
IP Mode
static
Local network
IP Address
192.168.0.10
Local network
Netmask
255.255.255.0
Local network
Gateway
blank/empty
Local network
DNS Server
blank/empty
Admin VLAN
IP Mode
static
Admin VLAN
IP Address
192.168.45.2
Admin VLAN
Netmask
255.255.255.0
Admin VLAN
Gateway
blank/empty
Admin VLAN
DNS Server
blank/empty
Data VLAN
IP Mode
dhcp
Data VLAN
IP Address
10.12.12.2
Data VLAN
Netmask
255.255.255.0
Data VLAN
Gateway
10.12.12.3
Data VLAN
DNS Server
8.8.8.8
If you utilize the antenna reset button, be sure to replace the network configuration as defined by the tables above.
Utilize the Kymeta web-based UI at
Settings
>
Network
to adjust the values to match the as-shipped configuration or
as required. It is recommended to utilize the Admin Wired Ethernet Port to access and make corrections to reduce
connectivity issues
