manualshive.com logo in svg

KYMCO Yager 200i, Руководство пользователя, Страница: 6 / 76

Поделиться
Скачать
KYMCO Yager 200i Скачать руководство пользователя страница 6

4

 SCOOTER SAFETY

PROTECTIVE APPAREL

For your safety, always wear an approved motorcycle or scooter

helmet, eye protection, boots, gloves, long pants, and a long-

sleeved shirt or jacket whenever you ride your scooter.
Helmets and protection

Your helmet is your most important piece of riding gear be-

cause it offers the best protection against head injuries. Your

helmet should fit your head comfortably and securely. Always

wear a face shield or goggles to protect your eyes and to aid

your vision.
Additional riding gear

In addition to a helmet and eye protection, you should also

use:

•

Sturdy boots with nonslip soles to help protect your

feet and ankles

•

Leather gloves to keep your hands warm and help pre-

vent blisters, cuts, burns and bruises

•

A motorcycle or scooter riding suit or jacket that has

been designed for comfort as well as protection.

Brightly colored and reflective clothing can help make

you more noticeable in traffic. Be sure to avoid loose
clothing that can get caught on any part of your scooter.

1

Wear gloves

2

Clothes should fit properly (not too tight or loose)

3

Always wear a helmet. You should also wear

eye protection

4

Wear bright or reflective clothing.

5

Footwear should be the proper size, have low

heels, and offer ankle protection

Not wearing a helmet increases your chance of serious

injury or death in a crash.

Be sure both you and your passenger always wear

properly fitting, approved motorcycle helmets. You

should also wear eye protection and other protec-

tive apparel when you ride.

1

1

1

1

1 2

2

2

2

2

3

3

3

3

3

4

4

4

4

4

5

5

5

5

5

Содержание Yager 200i













































































Отзывы:

Нет отзывов