The fuses are located in a power distri-
bution module in front of the steering
post under the electrical access panel.
If there is any type of electrical system
failure, always check the fuses first.
Always replace a blown fuse with a
fuse of the same type and rating. If
the new fuse blows after a short
period of use, consult an autho-
rized KYMCO ATV dealer imme-
diately.
Two output terminals for electrical
accessories are located on the front and
rear wiring harnesses. The accessory
plug is located on the front body panel.
Always use electrical accessories
less than 180W.
Adjust each headlight until correct
aim is obtained by turning the
adjuster clockwise to lower or
counterclockwise to raise the beam.
FUSES
NOTE: To remove the fuse, com-
press the locking tabs on either
side of the fuse cover and lift out.
ELECTRICAL OUTPUT
TERMINALS
STORAGE
COMPARTMENT
80
7.
KC0108A
CAUTION
CAUTION
ATV-1097
0411-837
Store an owner’s manual in the storage
compartment under the seat.