![KYMCO MXU 375 Скачать руководство пользователя страница 70](http://html1.mh-extra.com/html/kymco/mxu-375/mxu-375_owners-manual_2014955070.webp)
NOTE: Dirt and debris must be
cleaned from the cooling fins regu-
larily to ensure proper engine oil
change.
Continued operation of the ATV
with high engine temperature may
result in engine damage or prema-
ture wear.
NOTE: Use a spanner wrench to
adjust the sleeve to the desired
position.
NOTE: High engine RPM, low
vehicle speed, or heavy load can
raise engine temperature. Decreas-
ing engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the tempera-
ture.
SHOCK ABSORBERS
Each shock absorber should be visibly
checked weekly for excessive fluid
leakage (some seal leakage may be
observed but it does not indicate the
shock is in need of replacement),
cracks or breaks in the lower case, or a
bent shock rod. If any one of these con-
ditions is detected, replacement is nec-
essary.
NOTE: When the ATV is operated in
extremely cold weather (-23 C/-10 F
or colder), a small amount of leakage
may be present.
Unless the leakage is excessive,
replacement is not necessary. The
shock absorber has a spring force
adjustment sleeve with five adjustment
positions to allow the spring to be
adjusted for different riding and load-
ing conditions. If the spring action is
too soft or too stiff, adjust it according
to the chart.
GENERAL LUBRICATION
Cables
None of the cables require lubrication;
however, it is advisable to lubricate the
ends of the cables periodically with a
good cable lubricant.
Engine/Transmission
Oil and Filter
Position
Spring
Force
Setting
Load
1
2
3
4
5
Stronger
Soft
Stiff
Light
Heavy
68
KC0083
CAUTION
NOTE: Refer to the recom-
mended oil viscosity chart (on
page 64) in this manual for the
proper engine oil.
CD453
OIL COOLER