![KYMCO MXU 375 Скачать руководство пользователя страница 79](http://html1.mh-extra.com/html/kymco/mxu-375/mxu-375_owners-manual_2014955079.webp)
NOTE: The V-belt and pulleys
should be inspected every 500
miles and the belt replaced (if nec-
Always use the size and type of
tires as specified. Refer to the
appropriate specifications chart
for proper tire inflation pressure,
and always maintain proper tire
inflation pressure.
The use of worn-out tires on an ATV is
very dangerous. A tire is considered to
be worn out when the depth of the tread
is less than 3 mm (1/8 in.). Be sure to
replace the tires before reaching this
minimum specification.
The use of worn-out tires can be
dangerous and can increase the
risk of an accident.
It is very important to use the proper
tools when repairing or replacing tires
to prevent damage to the tire bead or
wheel rims. If proper tools and related
items are not available, have this main-
tenance performed by an authorized
KYMCO ATV dealer or a qualified tire
repair station
DRAINING V-BELT
COVER
TIRES
Tire Tread Condition
Tire Replacement
When breaking the tire bead loose
from the wheel, be extremely care-
ful not to damage the inner wheel
surface or the tire bead.
77
KC0049A
NOTE: If the ATV has been
driven through water, the V-belt
cover must be drained of any
water.
Place the ATV on a level surface.
Remove the drain bolt from the
cover and allow the water to drain
out.
Shift the range lever to the neutral
position; then start the engine.
Increase and decrease engine RPM
several times to
“
blow out
”
any
water; then stop the engine.
Install the drain bolt and tighten
securely.
1.
2.
3.
4.
5.
essary).
WARNING
WARNING
0732-649
The ATV has low-pressure tubeless
tires. Air is sealed by the contact sur-
faces of the inner wheel rim and the tire
bead. If either the inner wheel rim or
tire bead is damaged, air may leak. Be
extremely careful not to damage these
areas when replacing tires.
CAUTION
G
E
N
E
R
A
L
M
A
IN
T
E
N
A
N
C
E