KYLAND Technology SICOM3008PN, Руководство по установке оборудования

Страница: 21 / 28

Connection
16
Note:
Cross-sectional area of the chassis grounding cable>2.5mm
2
; grounding resistance<5

.
Caution:
The switch supports power input (as listed in Table 1). Before connecting the device to power
supply, make sure that the power input meets the power requirement. If connected to an
incorrect power input, the device may be damaged.
Warning:

Do not touch any exposed conducting wire, terminal, or component with a voltage warning
sign, because it may cause damage to humans.

Do not remove any part or plug in or out any connector when the device is powered on.
4.5 SYSTEM RESET
The Reset button is provided to reboot the system without the need to remove power. Under
normal circumstances, you will not have to use it. However, or rare occasions, the
PROFINET MANAGED SWITCH may not respond; then you may need to push the Reset
button.
Figure 18 System Reset