KYLAND Technology SICOM3008PN, Руководство по установке оборудования

Страница: 25 / 28

Switch Access
20
Figure 21 Setting Port Parameters
Step 6: Click OK to enter the switch CLI. Then you can run the commands in Table 9 to
perform operations.
Table 9 CLI Commands for SIMCOM3008PN
View Command Description
General mode SWITCH#enable Enter the privileged mode
Privileged mode SWITCH#show interface vlan 1 Query the IP address of the switch
Privileged mode SWITCH#show version Query the version of the switch
Privileged mode SWITCH#reboot Restart the switch
Privileged mode
SWITCH#set default
SWITCH#save
Restore the factory default settings
Privileged mode SWITCH#config terminal Enter the configuration mode
6.2 Access through Telnet
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
cable.