SICOM3004/SICOM3006 User’s Manual 201105
- 24 -
and the corresponding LINK indicators of the fiber ports go on, showing the testing fiber ports
work well. In the same way, test other pairs of fiber ports. The PING command example is as
follows.
Figure 5-2 Fiber port test
PING
command
example
：
Suppose the IP address of test computer 1 is 192.168.100.10 and the test computer 2 is
192.168.100.11. Click the “Begin” menu on the test computer 1, select the “Operation” item, input
“cmd” (WIN2000) or ”command” (WIN98/95), and send ping 192.168.100.11 –l 1000 –t; (‐1
means the number of bytes of sending packets, ‐t means keep sending the data);
Operate the “Begin” menu on the test computer 2, select the “Operation” item. input “cmd”
(WIN2000) or ”command” (WIN98/95), and send ping 192.168.100.10 –l 1000 –t.
Test computer 1 returns “Reply from 192.168.100.11
：
bytes=1000 time<10ms TTL=128”, Test
computer 2 returns “Reply from 192.168.100.10
：
bytes=1000 time<10ms TTL=128”. Ten minutes
later, use CTL+C command to get the packet loss rate. If the rate is “0”, it shows that the
equipments are running well.
