KWS AMA310/UMS Скачать руководство пользователя страница 55

Страница: 55 / 62

Chapter 9 - Instrument Management

AMA 310/UMS V21.0

If no cluster switch is connected to the AMA 310/UMS the note "not plugged!" is given behind the
item "SWITCH-MATRIX"!

9.8

Factory Setting

Via

MODE

→

PRESET

all non-volatile device settings can be reset to the factory setting. For this

purpose the key

←

YES"

has to be selected and confirmed by

ENTER

Figure 9-8 Resetting of the device to the delivery state

Note!

If applicable, save all UMS settings before resetting the device to the delivery
state (see Chapter 8.1.8 - Export/Import of the UMS Settings)!

9.9

Setting of Date and Time

The measurement receiver is equipped with a clock module. In some operating conditions date and

time are shown in the display line above the menu bar. By selecting the menu item

MODE

→

TIME/DATE

the following input menu can be called up. Here date and time can be changed, e.g.

for changing between summer and winter time.

Figure 9-9 Menu for setting date and time

By the keys ← and/or →

the cursor can be moved to the desired input field. Now the changed

input can be made by the numeric keyboard. Each input has to be confirmed by the

ENTER

key.

Then the cursor moves to the next field.

The inputs are saved if the cursor is moved to the field

APPLY

and then the

ENTER

key is

pressed.

9.10

Keyboard Settings

By means of the menu item

MODE

→

KEYBOARD

the illumination of the keys and the buzzer can

be switch off and on.

Figure 9-10 Configuration of the silicone keyboard

The picture shows the factory setting. This means the buzzer and the illumination are switched on.
These settings are non-volatile.

Содержание AMA310/UMS































































Результаты поиска

Содержание AMA310/UMS

Отзывы:

KWS AMA310/UMS, Руководство пользователя, Страница: 55 / 62

Результаты поиска

Содержание AMA310/UMS

Отзывы: