Chapter 10 - Memory management
10911 V01.06
38
Chapter 10
Memory management
The tuning memory of the instrument can store up to 99 channels. The memory preview function
provides an overview of the turning memory without requiring the user to call up all memory locations
ahead of time or to note down information when saving. The memory preview is activated when
saving and recalling program locations and with many memory functions. Use the
Up
and
Down
keys to navigate in the tuning memory; the
<-
and
->
buttons scroll through pages.
10.1 Saving
As a first step, the receiver needs to be tuned.
SAVE
takes you to the “SAVE” menu. The instrument
searches the tuning memory for the first free location and suggests this as the number to be used for
saving. You can also use the keypad to enter any memory location between 0 and 99. The contents
of the memory location are displayed next to the location number. Press
SAVE
or
ENTER
to save
the location. If the desired memory location is already assigned, the instrument issues a warning. To
overwrite the memory, press the
ENTER
or
SAVE
button a second time.
10.2 Recalling
Press the
RECALL
button to open the “Recall” menu. When this menu is opened for the first time
after the instrument is switched on, the instrument suggests memory location 1. Each time the recall
function is accessed, the memory location number increases by one. That means that the instrument
will suggest memory location 2 next.
It is also possible to select any other memory location using the
numeric keypad or up/down keys (1 memory location) –
<-
and
->
keys (10 memory locations).
Press
RECALL
or
ENTER
to recall the memory. The measuring receiver then accepts the settings from the
memory. If the memory location is empty, the old settings remain unchanged.
10.3 Memory
functions
The memory functions can only be operated if the measuring receiver is not tuned.
10.3.1 Erasing the memory
Use
MODE
->
memory
->
erasing all memory
to erase the entire tuning memory. A warning is
issued before the information is erased. The instrument does not erase the tuning memory until you
confirm again by pressing
ENTER
. This can take a few seconds.
The instrument then issues a message that the process is complete.
Содержание VAROS 109
Страница 43: ...Chapter 12 Common Interface 10911 V01 06 43 ...
