KWS Electronic VAROS 109, Руководство пользователя

Страница: 33 / 60

Chapter 8 - SCAN Support for Finding Satellites
10911 V01.06
33
The scan parameter (satellite, transponder frequency etc.) are a fixated componant of the satellite
and cannot be found in lists prior to 21.1.2011. Therefore the SAT lists should be kept up-to-date.
(View the chapter „SAT- lists import“ ).
Note:
If Quattro LNBs are used, the various SAT identifications are not sent on all levels.
The LNB should be connected to the connectors for the horizontal high or vertical low levels since
only these levels are searched.
The relevant data can be found in the document which accompanies the SAT list.
8.2 SAT list
Open the SAT list by pressing
SCAN
in the main menu. Use the
<-
and
->
arrow keys to browse
through the list page by page; individual satellites can be selected using the
Up
and
Down
keys.
Pressing the
SCAN
button again displays the transponder list for the selected satellite.
The SAT list is provided by the instrument manufacturer and updated on a regular basis. Check
whether the list being used is up-to-date (use the date code in the second line of the list for this).
To
update the list please view the chapter SAT-list import.
8.3 Transponder list
In addition to reception parameters such as frequency and modulation, the transponder list includes
transponder numbers and names if they are known. As for other lists, one element can be selected.
Press
SCAN
or
ENTER
to tune. Press
ESC
to return to the previous list.