5
Chapter 3 Operation
3.1 Top Cover Buttons
Audio Mode
Select the audio channel – Stereo/Mono-L/Mono-R.
Channel Down/Up
Power On/Off
AUDIO in remote control does the same thing.
3.2 Getting Started
After the receiver is powered on, it will go to standby mode.
The RED LED is turned on. You can use the remote
“POWER” key or the
on the top cover to start the
operation (GREEN LED is on).
NOTE:
When DVB-T 730 is powered on and stay at
standby mode, it will re-direct the PC video and audio to
monitor and speaker. After the operation, the DVB-T video
and audio will be sent out.
Language Setup
Select the OSD Menu Language – English,
Deutchschland, Italiano, Français and Español.
The receiver will start to search all frequencies to look for
available TV and Radio channels when the 1
st
time operation
is started.
The Audio Language option will play the preferred
speech when it is available.
12
