6. Attach left base and right base to bottom bar using channel spacers and 3/8” hardware. Note direction of
decals on bottom bar before fastening. Be sure connections are pressed firmly together before tightening hex
bolts.
7. Insert four 3/8” square nuts into the left base and four into the right base. Secure square nuts in bases by
threading a 3/8” x 1” hex bolt in the front 3/8” square nut approximately 14” from the back corner as shown.
NZ464 Rev. 11/11/20
Any modifications to this or any Kwik Goal product will void any and all warranties.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
3/8” Square Nuts
3/8” X 1-3/4” Hex Bolt
Channel Spacer
3/8” Flat Washer
Right Base
3/8” Lock Washer
Bottom Bar
Bottom Bar
Decals
Left Base
Right Base
3/8” Square Nuts
14”
3/8" X 1" Hex Bolt
