Assembly Tools
AND
Parts - Continued
Net Clip (100)
(Part# 10B3101 Pack of 100)
Ratchet with
1/2” & 9/16”
Sockets
1/2” & 9/16”
Wrenches
9/
16
Net Strap (1)
(Part# 10B4406)
NZ464 Rev. 11/11/20
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Chain (4)
w/ Snap Link & Anchor Plate
(Part# UZ846 )
Channel Spacer (6)
(Part# UZ812)
Net (1)
(Part# 3B7721)
Rubber Mallet
Scissors
Ground Anchor (4)
(Part# 10B103 Pack of 4)
before beginning assembly.
Note: Hardware is packed separately in one or more boxes.
5/16“ x 1” Hex Bolt
(Part# TZ330)
(16)
Wheel Hdw
(Part#JZ158)
5/16" Flat Washer
(Part# TZ4)
(16)
Open all boxes and layout all sealed hardware packs
Goal Hdw
(Part# JZ281)
3/8“ Flat Washer
(Part# TZ60)
(28)
3/8“ x 1” Hex Bolt
(Part# TZ290)
(8)
3/8" x 7/8" Hex Bolt
(Part# TZ249)
(8)
3/8“ Lock Washer
(Part# TZ65)
(28)
3/8“ x 1-3/4” Hex Bolt
(Part# TZ227)
(12)
5/16” Lock Washer
(Part# TZ174)
(16)
3/8" Square Nut
(Part# TZ247)
(16)
5/16” Lock Washer
(Part# TZ122)
(4)
Bumper Hdw
(Part# JZ282
)
5/16“ x 1” Hex Bolt
(Part# TZ121)
(4)
5/16" Eyebolt
(Part# TZ120)
(2)
5/16" Flat Washer
(Part# TZ269)
(6)
Bumper Cable Assembly (10)
(Part# VZ880)
Hole Cap (20)
(Part# VZ884)
(Part# VZ125)
Bumper Cap (10)
Chain (4)
(Part# VZ564-18)
18-1/2”