NZ464 Rev. 11/11/20
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Insert bumper weights into bumper tubes. Using a rubber mallet insert bumper caps in each end as shown.
17. Hardware for steps 17 and 18
is in Bumper Hdw
pack.
Base Bumper Assembly
69”
75”
Base Bumper Weight
Bumper Cap
Bumper Cap
Base Bumper Tube
Bottom Bar Bumper Assembly
Bumper Cap
83-1/2”
92”
Bottom Bar Bumper Weight
Bumper Cap
Back Bottom Bar
Bumper Tube
