K60x User Guide
26
K60x User Guide
5.
Connect PoE input by snapping the weatherproof Harting push-pull plug into Port 1,
as shown in the image below. Twist the yellow ring on the plug to lock it in place.
(Harting IP67 field termination kits and pre-assembled Ethernet cables may be
purchased from
.) Repeat the process to connect cable to Port 2,
as needed. Use the Kwikbit-supplied port caps to cover any unused ports.
6.
Optional:
install a ground wire, if required. Use the fifth screw provided with the
unit to attach the wire to the predrilled hole on the lower part of a heat fin. (See the
graphic for attaching the mounting bracket
, in the steps above for the location.)
Continue mounting all prepared units, until the installation is complete.
Содержание K60x
Страница 1: ...K60x Wireless Communication System User Guide June 8 2021...
Страница 14: ...K60x User Guide 14 K60x User Guide...