THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
NZ376 Rev. 12/04/19
(CAUTION DO NOT OVER TIGHTEN BOLTS.)
17. Starting at one end, attach molded seats to molded seat crossbars. After all molded seats are attached to
molded seat crossbars, tighten all seating bolts.
Molded Seat Crossbar Rear
Molded Seat Crossbar Front
1/4” Flat Washer
1/4” Flat Washer
1/4” Lock Nut
Remove plastic cover and
replace after tighten bolts
Molded Seat
1/4” X 2-3/4 Hex Bolt
Molded Seats
Molded Seat Crossbars
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.