THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
6. Attach seat frames at seat frame plate locations.
(CAUTION DO NOT OVER TIGHTEN BOLTS.)
Seat Frame
Tighten nuts only until flush with
end of bolts. Bench frames must
pivot up & down freely.
Tighten These
Bolts First
Assembled
Center Panel
Uprights
Center Panel Uprights
Assembled Shelter
3/8” Flat Washer
3/8” Lock Nut
Seat Frame Plate
3/8” Seat Frame Spacers
3/8” Flat Washer
3/8” X 4-1/4” Hex Bolt
Seat Frame
NZ376 Rev. 12/04/19
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.