KWIK GOAL 9B51 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 34

background image

READ CAREFULLY

IMPORTANT SAFETY INSTRUCTIONS

1. Lifting and moving heavy field equipment can be dangerous if not done

properly. All Kwik Goal shelters must be moved by qualified personnel who are
experienced in moving large, heavy field equipment. Kwik Goal recommends
storing dolly and wheels in a secured area to prevent unauthorized use.

3. Do not attempt to lift, move, or remove anchors from any shelter in windy

conditions.

2. A minimum of four qualified, experienced people are required to install wheels

and move shelter.

4. Shelters must not be left unattended when wheels are installed.

5. Shelter must be on level, flat ground to use dolly handle and/or wheels.

6. Dolly is to be used as a wheel transport/storage and shelter lifting device. Do

not use dolly to move shelter.

7. Use extreme caution when pushing shelter. Excessive force can overturn

shelter. Always push at lowest point on shelter frame possible.

8. Do not push shelter directly from the front to rear or rear to front. Push from

end to end. (Refer to 9B1201 - Shelter Dolly instructions for details.)

9. Always use two people to lift shelter with dolly. With one person maintaining

light pressure on the handle, the second may insert wheels into shelter. Install
both wheels before resting shelter on the ground. (Refer to 9B1201 - Shelter
Dolly instructions for details.)

NEVER LOWER SHELTER WITH ONLY ONE WHEEL INSTALLED

NZ373 Rev. 12/04/19

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2015, Rev 2019 Kwik Goal Ltd.

©

«
1
2
3
4
...
»

Содержание 9B51



































Отзывы:

Нет отзывов

Похожие инструкции для 9B51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды