Crossbar (2)
(Part# SEE TABLE)
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
NOTE: Components may be packaged in one or more additional boxes.
*THIS UNIT MUST BE ASSEMBLED BY A MINIMUM OF TWO QUALIFIED PERSONS*
2. Read through entire instruction before beginning assembly and installation.
NOTICE Sunlight reflecting off polycarbonate panels can contribute to increased temperatures of
surrounding objects. In certain situations, these increased temperatures can damage some artificial turf
surfaces. Kwik Goal is not responsible for any damage to artificial turf.
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
ASSEMBLY INSTRUCTIONS FOR ALL 9B51 PORTABLE SHELTER FRAMES
Left Post (1)
(Part# UZ1103)
67-1/8”
Date of manufacture sticker
67-1/8”
Right Post (1)
(Part# UZ1103)
(A)
PART #
SHELTER WIDTH
DIM (A)
UZ1559
30’
362-3/8”
UZ1116
24’
287-3/4”
UZ1433
21’
250-7/16”
UZ1434
18’
213-1/8”
UZ1435
15’
175-13/16”
UZ1436
12’
138-1/2”
UZ1114
9’
101-3/16”
NZ373 Rev. 12/04/19
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
Parts
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2015, Rev 2019 Kwik Goal Ltd.
©
