kWiet Power dgw400dm, Руководство владельца и оператора

Страница: 34 / 40

- 31 -
12. Long-Term Storage
13. Troubleshooting
Warning: Electric Shock/Injuries
•
Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. A person performing the maintenance should always keep
the key.
Caution: Burn
•
When checking engine, always stop the engine, and keep far away from fire.
•
Temperature around muffler and exhaust can get extremely high. Wait until the
engine cools down, before performing any checks.
If the generator/welder will not be used for more than two months, perform the
following maintenance and storage procedures.
1) Remove the battery.
2) Change the engine oil.
3) Drain fuel from the fuel tank and the fuel strainer.
4) Clean all parts, cover the generator/welder, and keep it in the storage, away
from dust and humidity.
<Note>
•
Recharge the removed battery once a month.
Warning: Electric Shock
•
Do not operate the equipment, if the equipment or you are wet.
•
Before performing any equipment check or maintenance, stop the engine.
Caution: Injuries
•
When performing equipment check and maintenance, always stop the engine.
Caution: Burn
•
When checking engine, always stop the engine, and keep away from fire.
•
Temperature around engine, muffler and exhaust can get extremely high. Wait
until the engine cools down, before performing any checks.
Follow the guideline below, when performing any troubleshooting. If you cannot
resolve the problems by this troubleshooting guide, contact the authorized
distributor or our engineering section to request the repair.