KVM-TEC Ultraline UVX1, Инструкция по эксплуатации, Страница: 16 / 37

16 | kvm-tec
2. installation of the extender
• For the UVX1-F with Network Switch (see chapter Requirements for cable requirements):
WARNING! The uVX1-F is a Class 1 Laser Product. Avoid exposure to the beam!
• Make sure the dust protectors have been removed from the SFP+ modules.
Connect one end of a fibre cable (not included) to the kvm-link port (7 /21 ) on the
uVX1/local /CPu unit (A). Make sure that the plug is latched.
• Connect the other end of the fibre cable to one of the two fibre ports on the
Network Switch ( 10 G)
• Connect the other end of the second fibre cable (not included) to the other fibre
port on the Network Switch. ( 10G)
• Connect the other end of the second fibre cable to the kvm-link port (13) on the
uVX1/remote unit (B).
• For the UVX1-F without Network Switch (see chapter Requirements for cable
requirements):
WARNING! The uVX1-F is a Class 1 Laser Product. Avoid exposure to the beam!
• Make sure the dust protectors have been removed.
• Connect one end of a fibre cable (not included) to the kvm-link port (4) on the
uVX1/local unit (A). Make sure that the plug is latched.
• Connect the other end of the fibre cable to the kvm-link port (13) on the uVX1 - F
remote unit (B).
17. If you are using a Network Switch, connect your other work stations (remote extenders)
and computers (local extenders) with the Network Switch (see chapter Requirements for
switching requirements).
18. If you are using a Network Switch, connect the Power supply to the AC connection on
the Network Switch.
19. Connect a Power cable to uVX1/local unit (6)
20. Connect the other Power cable to uVX1/remote unit (20) .