KVM gruppen DSIP-1000, Руководство пользователя

Страница: 7 / 30

Connection Setup
This section describes how to connect the cables and how to
connect the DSIP­1000T and the DSIP­1000R.
DSIP­1000T Transmitter (PC Adaptor) Connection
The DSIP­1000T is connected to your PC. The connection
method is shown below. Using the USB cable, VGA­to­DVI cable
and two audio cables, connect rear panel connectors on the
DSIP­1000T to the connectors on PC. Your local monitor may be
connected to the VGA connector on the front panel. The IR
blaster cable is connected to the IR connector on rear panel and
the IR blaster LED must be facing the IR receiver of your Media
Center PC, TV tuner card or DVD player. Connect the included
power adapter to the DC power socket and plug the power supply
to wall. To avoid damage of the DSIP­1000T, please use the
power adapter in the package only. The RJ­45 connecter is for
connection to any Ethernet CAT­5 device or directly to the DSIP­
1000R RJ­45 socket. A switching HUB can be placed between
DSIP­1000T and DSIP­1000R but both DSIP­1000T and DSIP­
1000R must be put in the same class C network.
Kvm groupe
http://www.kvmshop.dk
7