KVM gruppen DSIP-1000, Руководство пользователя

Страница: 24 / 30

Step 3: Hold the Reset button of the device to be upgraded
firmware and power on. The power LED of the device will
blink red. The power LED will become orange and the
status red. Only in this status, you can get access to the
HTTP server of the device. On the other word, you
cannot get access to the HTTP server in other status.
Step 4:
Use an Ethernet Cable to connect the PC or laptop
and the device. The power LED is still orange and the
status LED becomes green blink.
Step 5: Ping the connected device through the sequence, Start
> Run > cmd > ping 192.168.168.21 or ping
192.168.168.22. You will receive the reply if the
connection is established. Disable the antivirus and
firewall software and use IE browser to get access the
web server.
Type http://192.168.168.21/ u pg.h t m to upgrade the
DSIP­1000T firmware.
Type http://192.16 8 .168.22/u p g. h tm to upgrade the
DSIP­1000R firmware.
Note: You have to disable antivirus software and
firewall software before you upgrade
firmware. Firmware upgrade process
cannot be interrupted so please do not turn
off your computer or the upgraded device
or disconnect the Ethernet cable until the
process is finished. Otherwise the system
will crush.
Kvm groupe
http://www.kvmshop.dk
24