KVM gruppen DSIP-1000, Руководство пользователя

Страница: 16 / 30

connection to DSIP­1000T using CAT5 network cabling through
the RJ­45 connector. To avoid damage to the DSIP­1000R,
please use the adapter in the package only.
LED display
LED Color Status Descriptions
Status
Green
On Local area network is connected
Off Local area network is not connected.
Blink Ethernet active
Orange/Red Blink The DSIP­1000R is using large
network bandwidth.
Power
Off Off Power off
Green Green Power on and network connection is
established.
Red Red Power on but network connection is
not established.
Push button Descriptions
Source Push it to select the DSIP­1000T to be
connected.
IR Receiver
The IR receiver is connected to the IR receiver socket at the rear
panel of the DSIP­1000R. This cable can be used as an IR
receiver extension when you put the DSIP­1000R behind
something and the IR receiver on the DSIP­1000R not
conveniently visible. The IR receiver can receive a 38k Hz IR
signal from any remote controller and transmit it to the DSIP­
1000T.
Kvm groupe
http://www.kvmshop.dk
16