KVM gruppen DSIP-1000, Руководство пользователя

Страница: 12 / 30

DSIP­1000T Panel
The connectors on the rear panel of the DSIP­1000T are
connected to the source PC and the VGA connector on the front
panel is connected to the local monitor. The power adapter, IR
blaster cable and Ethernet cable are connected to the rear panel.
There are two slide switches are located on the DSIP­1000T. The
[Remote input] switch selects whether the PC can be controlled by
the keyboard, mouse or IR on the DSIP­1000R receiver. The
DVI/VGA switch can be used to select either DVI or VGA source
input.
Note: The DVI connector on the rear panel of DSIP­1000T is DVI­I
(digital and analog) connector which supports DVI­D
(digital), generally called DVI, or DVI­A (analog) which
provides the same analog signal found on a VGA connector.
The included cable is a VGA to DVI­A cable. If you want to
use better performance DVI­D (digital) signal, you can use a
DVI­D to DVI­D cable to connect your PC and the DSIP­
1000T.
Front Panel and Rear Panel
Kvm groupe
http://www.kvmshop.dk
12